Go BottomTC33D want start in one neutral
 | RockyTop
Join Date: Nov 2006 Posts: 0 18158 Hunt Ave. Windsor, Mo. 65360 
|
2001-09-29 32108
My new TC33D just recently will not start in one of the neutral settings (the one betweenrange I and II). What is going on? Startsfine in the other neutral.
Reply to |
Quote Reply |
Add PhotoTC33D want start in one neutral
| John Mc
Join Date: Feb 2002 Posts: 98 Vermont
|
2001-09-29 32109
I have the same problem with my TC33D. It often (maybe always? I can't remember) won't start in the neutral between 1 & 2, but starts every time in the "rearmost" neutral (between 1 & 3). I keep forgetting to ask the dealer about this. It was just in for it's 50 hr maintenance... I should have asked them to look it over at the time. I'll be interested to hear what kind of responses you get.
....
Reply to |
Quote Reply |
Add PhotoTC33D want start in one neutral
| Bing
Join Date: Posts: 1
|
2001-09-29 32110
You might check the plug connector for the safety switchs, that is underneath and as I recall in front of the rear axle. You might have a bad connection. I got into some brush and got mine unplugged and it wouldn't start at all. ....
Reply to |
Quote Reply |
Add PhotoTC33D want start in one neutral
| RickB.
Join Date: Posts: 1
|
2001-09-30 32118
The neutral safety switch for the range trasmission is ever so slightly out of adjustment. It can be accessed from the rear of the tractor, inside the left rear wheel. If under warranty, as I suspect it is, have your dealer stop by and adjust the switch. ....
Reply to |
Quote Reply |
Add PhotoTC33D want start in one neutral
| ssoper
Join Date: Posts: 1
|
2001-12-24 34016
I think this must be the only weakness I have found in this tractor......AND.... there are 2 neutral switches - one on PTO
and one on range selector.....
the range selector switch went out of adjustment on mine the first day of use.....then the PTO switch got damaged by a peice of brush........ARGGGGGG but no trouble since and my dealer's salesperson came out on two seperate Sundays and made both repairs! :) ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This